$ 120.00 $ 99.00
Please Select BLUE GREEN RED WHITE PURPLE ORANGE
Please Select 01-07 CBR600 F4i 02-03 CBR954RR 02-11 VFR 800 (Quad) [+25.00] 00-06 RC51 03-06 CBR600RR (Dual) 03-06 CBR600RR (Quad) [+25.00] 04-07 CBR1000RR (Dual) 04-07 CBR1000RR (Quad) [+25.00] 07-12 CBR 600RR VTX 1300-1800 [-35.00]
CCFL halo eyes that install inside of the stock headlights. For your Honda CBR 600RR, CBR 1000RR, F4i, CBR 250R, 954RR, VTX, RC51. (additional illustration photos may be shown at the bottom of this page) SELECT the bike model and color options drop boxes at the bottom of this description before adding to cart. These halos have been around for years and are the introductory halo eyes for your Honda. High beams should not be used for more than a few minutes at a time with these installed. They may melt on some models. HID lights help reduce the heat and melt possibility. An on/off toggle switch is included with your purchase. Get yours now.
This is our #2 ranked Halo kit. Choose from BLUE, GREEN, RED, PURPLE, ORANGE, PINK, or WHITE.
* Designed not to burn out or melt from the headlights (Excessive high beams on some models can damage CCFL)
* Are clearly visible in daylight and direct sunlight, but most visible in low light conditions
* Draw very little current
* Are completely waterproof
* Are professionally engineered and manufactured
* The delicate CCFL ring is protected by a waterproof protective housing
* The housing also increases the light effect
* Uses locking clips to transformer to guarantee a solid connection
Professional Installation is highly recommended
-ALL hardware and installation instructions are included. A toggle switch enabling you to turn halos on and off with a flip of the switch is also included
-1 year manufacturer warranty
-Up to 10,000 hour life expectancy
Get yours now, only a few sets are currently available. Illustration photo shown below of included hardware with purchase. 2 ring kit shown: (4 ring kits for select bike models will have additional rings and hardware) Silicone glue is NO longer included. (Silicone glue is recommended for installation of the rings).
ION Halo Eyes FAQ's
Please read the directions before purchasing Halo Eyes. It is highly recommended that only qualified/experienced individuals install CCFL ION Halo Eyes.
Q: How do the CCFL Halo's work?
A: Each eye is made from CCFL tubing, kind of like a neon light... they mount to the inside the headlight, around the bulb/projector. Then the halos are wired to the headlight.
Q: How do the ION Halo eyes install?
A: The headlight must be removed and placed in the oven ONLY for a few minutes to soften the glue or heat the head light seal up with a heat gun. The CCFL eyes mount inside the headlight with a silicone glue (not included)
Q: Can I use my high beams with the eyes?
A: Yes, but in limited amounts of time only
Q: Will I receive basic instructions with photos with this purchase?
Get Your CCFL ION Halo Eyes Now