1-800-390-7030
mon-fri 11am-5pm pst
sat 11am-4pm pst
Cart
Menu
Close

Integrated Tail Lights-CRUISER FAQ's

INTEGRATED TAIL LIGHTS- CRUISER- FREQUENTLY ASKED QUESTIONS

Q: Does this light include something to hold the license plate?

A: NO, This is only a tail-light that replaces the stock tail-light.   

Q:  Is it OEM Fit.  Nothing to modify...... In Other Words.. Is it  Plug and Play?

A:  YES.   Just pop out your stock tail light lens, and install the new lens and plug the LED integrated board/bulbs to the bulb socket on the motorcycle. Next use the included red connectors to connect the 2 yellow wires from the integrated LED board/bulbs to the signal harness on the motorcycle. 

Q:  Does it have a OEM plug for the tail light?

A: YES

Q:  Does this tail light include the integrated turn signals?

A:  YES

Q:  Are the integrated turn signals AMBER in color ?

A:  YES

Q: Are the RED LED's dual functioning with running and braking lights?

A: YES, Our LED's shine red and have two levels of brightness; running and brake

Q:  Are the brake/running lights RED in Color ?

A: YES

Q:  Can I also use my rear turn signals along with the Integrated ones?

A:  YES,  you can use both if you choose.

vrod5vrod6

Q: Will the turn signals flash faster than the stock signals?

A: No, they will blink at the same rate as the stock signals when the included "Flash Relay" is installed. Without the use of the flash relay, all types of LED signals will flash at a faster rate of speed.

Q: How soon can I expect to receive my purchase?

A: Average time to receive Clear Alternatives products is 4-6 business days from the payment date.

Q: How does this tail-light install to my bike?

A: 1. Simply Remove the existing tail light lens.

2. Plug in the bulb style connector from the integrated LED board/bulbs to one of the bulb sockets on the motorcycle. (Plug & Play)

3. Bolt on the tail-light lens, should be 2-4 bolts from the stock tail-light lens that are used.

4. Connect both yellow wires from the LED board to the positive lead wires on the factory wire harness using the included connectors for an integrated signaling function. Instructions are included.

5. Get Flash'en